Model: 160HP Hydarulic Standard Type Bulldozer TY160-3
■Main Features:
»A Weichai WD10G178E25 engine which gives you more power and reliability you need. Improved fuel economy over the previous model with strong torque output and low fuel consumption gives you excellent overall fluid efficiency.
»The gearbox uses a planetary gear structure that operates the hydraulic control valve to achieve forward, reverse and various shifts. The structure is planetary gear, multi-plate clutch, hydraulic combined with forced lubrication, which is divided into three forward and three reverse.
»The closed system keeps the tank pressure at a specific value, which can increase the evaporation temperature and heat dissipation efficiency of the cooling water. The fan power comes from the engine, and the forced air supply increases the cooling effect.
»Mainstream 14MPa working hydraulic system,can greatly reduce the failure rate of hydraulic components with overload protection function.
»The use of waterproof connector of the whole vehicle,new relays and injection molding instruments can effectively eliminate the failure of the electrical system. The instrument box integrates air conditioning, electrical appliances and instruments into one, which is more beautiful and luxury.
»The main frame of the full box structure adopts steel plate welded full box type integral structure, which is welded with the rear axle box. It has high impact load bearing capacity and resistance to bending and twisting. High quality weld seam ensures the main frame has a full life cycle.
»The swing type balance beam suspension structure with splayed beam is connected with the frame and traveling system to transmit the working load and impact load to the main frame during working, which effectively improves the stability of small-sized bulldozers under complicated working conditions.
»The standard straight tilt blade features powerful cutting force and the three-shank ripper can be equipped for the ripping of clay and frozen earth, featuring high working efficiency and super-strong penetrating force
■主要技术参数 Main Specifications
型号 Model:TY160-3
名称 Type:160HP Standard Hydraulic Crawler Type
发动机型号 Engine model:Weichai WD10G178E25
发动机排量（L）Displacement:9.726
额定功率（kw/rpm）Rated power:131/1850
最大扭矩（N.m/rpm）Max.torque:830/1000-1200
使用重量 Operating weight:17T
长×宽×高(mm) Dimension(no ripper):5140×3388×3032
最小离地间隙(mm) Min ground clearance:405
接地比压(MPa) Ground pressure:0.067
履带中心距（mm） Track gauge:1880
铲刀容量(m³) Dozing capacity:4.55
铲刀宽度（mm） Blade width:3390
铲刀高度（mm） Blade height:1150
最大切削深度（mm） Max drop below ground:540
履带板宽度（mm） Track shoe width:510
链轨节距（mm） Pitch:203.2
链轨节数量 Quantity of track link:37
托轮数量 Quantity of Carrier rollers:4
支重轮数量 Quantity of Track rollers:12（8 Double+4 Single）
液压系统最高工作压力（MPa） Max pressure:14
液压系统流量L/min Discharge:213
最大牵引力（KN） Max tractor force:146
爬坡性能 Grade ability:30°
■前进各档速度 (Km/h) Forward Speed
F1:0-3.29
F2:0-5.82
F3:0-9.63
■后退各档速度 (Km/h) Rear Speed
R1:0-4.28
R2:0-7.59
R3:0-12.53
Notice : Material and specifation are subject to change without notice , Feature machine in photos may include additional equipment
---end of the page---
