Model: TY-220-3

■Main Features:

»A CUMMINS NT855-C280S10 engine which can meet gives you more power and reliability you need. Improved fuel economy over the previous model with strong torque output and low fuel consumption gives you excellent overall fluid efficiency.

»The highly reliable power shift transmission, stable torque converter and the two-stage straight-tooth structure final drive transmit power efficiently.

»It can realize automatic fault diagnosis and full monitoring.The overall cast instrument panel integrates air conditioning, electrical appliances and instruments into one, which is more beautiful and luxury.

»The main frame of the full box structure adopts steel plate welded full box type integral structure, which is welded with the rear axle box. It has high impact load bearing capacity and resistance to bending and twisting. High quality weld seam ensures the main frame has a full life cycle.

»According to the ergonomic design, the driver's seat and armrest can be adjusted up and down, the shifting, steering and throttle are placed on the left side, and the soft shaft structure is adopted. The working device is operated on the right side, and the servo control system is used to make the operation process more light and flexible.

»The standard straight tilt blade features powerful cutting force and the three-shank ripper can be equipped for the ripping of clay and frozen earth, featuring high working efficiency and super-strong penetrating force

■主要技术参数 Main Specifications

型号 Model:TY220-3

名称 Type:220HP Standard Hydraulic Crawler Type

发动机型号 Engine model:CUMMINS NT855-C280S10

发动机排量（L）Displacement:14.01

额定功率（kw/rpm）Rated power:175/1800

最大扭矩（N.m/rpm）Max.torque:1030/1250

使用重量 Operating weight:23.5 Ton

长×宽×高(mm) Dimension(no ripper): 5460×3725×3395

接地长度 (mm) Grounding length: 2730

接地比压(MPa) Ground pressure:0.077

履带中心距（mm） Track gauge:2000

铲刀容量(m³) Dozing capacity:6.4

铲刀宽度（mm） Blade width:3725

铲刀高度（mm） Blade height:1317

最大切削深度（mm） Max drop below ground:540

履带板宽度（mm） Track shoe width:560

链轨节距（mm） Pitch:216

链轨节数量 Quantity of track link:38

托轮数量 Quantity of Carrier rollers:4

支重轮数量（每侧） Quantity of Track rollers（each side）:6

液压系统最高工作压力（MPa） Max pressure:14

液压系统流量L/min Discharge:262

最大牵引力（KN） Max tractor force:202

前进各档速度 (Km/h) Forward Speed:  F1:0-3.6,F2:0-6.5,F3:0-11.2,

后退各档速度 (Km/h) Rear Speed:  R1:0-4.3,R2:0-7.7,R3:0-13.2

Notice : Material and specifation are subject to change without notice , Feature machine in photos may include additional equipment.

---end of the page---